Architectural Scale
Portal de la Pau Grandstands
UTE NOVA REHABILITACIÓ PORTAL DE LA PAU | Barcelona | December 2023
Heritage survey of the Portal de la Pau grandstands prior to their refurbishment. Massive data capture was carried out, combining terrestrial laser scanner TLS and photogrammetry with colour calibration.
Dragon Gate
Institut del Paisatge Urbà i la Qualitat de Vida | Barcelona | December 2023
A previous survey, carried out in 2016, was used to carry out the raster and vector planimetry of Gaudí's Dragon Gate at a reference scale of 1:20, which will be used as the basis for its restoration.
Perú Street Ofices
Teaching support | Barcelona | November 2022
Project in collaboration with the Construction course of the Bachelor's Degree in Architectural Studies (GArqEtsab) which consists of a survey with the Matterport scanner that allows students to take an interactive tour of a space under construction.
ETSAB
Teaching support | Barcelona | November 2022
The VIMAC laboratory is located at the Escuela Técnica Superior de Arquitectura de Barcelona, so our test bench could not be other than the ETSAB. Here we test all our equipment and technologies in order to advance in the research of architectural surveys and the creation of digital twins.
Passeig de Gràcia
Jornet Llop Pastor Arquitectes | Barcelona | January 2022
A general survey of the façades of Passeig de Gràcia in Barcelona and a detailed survey of the section between Consell de Cent and Diputació were carried out in order to obtain the volumetry of the roofs.
Claver Raimat School
Museu d'Història de Barcelona (MUHBA) | Barcelona | September 2021
A BIM model (LOD100) of an 18,000m2 building has been created using the SCANtoBIM methodology, which has made it possible to speed up the processes in order to achieve this in just a few months.
Fabra i Coats Factory
Museu d'Història de Barcelona (MUHBA) | Barcelona | December 2021
A photogrammetric survey of the Fabra i Coats factory site in the Sant Andreu del Palomar district of Barcelona has been carried out, which has allowed the previous survey carried out in 2012 to be textured. A TLS survey has also been carried out of all the spaces that have been modified in the rehabilitation works that have been carried out.
Palau Reial Major
MUHBA | Barcelona | November 2020
Development of a high-resolution three-dimensional point cloud model that can be visualised in an interactive environment in real time. This model will serve as the basis for the generation of an image output for the correction and validation of CAD plans of the Tinell Hall at different scales to complete the floor plans, interior façades and representative sections.
Enric Llorens House
Fomenti | Barcelona | March 2020
A TLS and photogrammetric survey of a heritage building and the pavements of 44 spaces was carried out at a scale of 1:5.
Castelldefels Castle
MArch. Estefanía Martín | Castelldefels | October 2019
This is an architectural survey of a heritage building, the towers of the castle of Castelldefels, in order to have the plans for a future rehabilitation of its interiors: the set up of bathrooms.
Campoamor Reisdence
Privado | Barcelona | February 2019
Architectural survey project in order to have the plans of a listed house. This project took from the scanning process to making a 3D BIM model and final vector plans.
Sagrada Familia
Basílica de la Sagrada Família | Barcelona | January 2018
High-precision TLS technology survey of the Nativity Façade of the Expiatory Centre of the Sagrada Familia at a resolution of 5mm with a coverage of over 95%. A photogrammetric survey of the exterior of the façade was also carried out.
Sant Miquel de Montmagastre
Ajuntament d'Artesa de Segre i MBarch | Montmagastre | September 2018
Preparation of a point cloud model and 3D mesh using laser scanning and photogrammetry techniques. The model is made in order to be able to analyse what remains of this church for its possible future conservation and restoration, producing raster and vector plans and images with information that allows the detection of pathologies in a more precise and measurable way.
Casa Parés Foundry
MUHBA | Barcelona | November 2017
This is an app that allows you to navigate freely inside the 3D model of the Casa Parès Foundry. The 3D survey of this project was carried out using a new methodology, which consists of a combination of photogrammetry and point clouds taken with a laser scanner (TLS).
Sala Napoleónica
Oficina de l’Historiador de Cuba | La Habana - Cuba | November 2014
In conjunction with the Directorate of Global Justice and International Cooperation of the Barcelona City Council, the TLS survey of the Napoleonic room was used as a case study for teaching the heritage services of Havana.
Fabra i Coats Factory
Museu d'Història de la Ciutat de Barcelona (MHCB) | Barcelona | Marzo 2013
Development of a high-resolution three-dimensional point cloud model that can be visualised in an interactive environment in real time. This model will serve as the basis for the generation of output images to scale for the correction and validation of CAD plans of the Fabra i Coats boilers at different scales to complete the floor plans, interior façades and representative sections.
Guard's House
Museu d'Història de Barcelona (MUHBA) | Barcelona | December 2012
It consists of the elaboration of a high-resolution three-dimensional point cloud model that can be visualised in an interactive environment in real time. This model will serve as the basis for the generation of output images to scale by the correction and validation of CAD plans of the Casa del Guarda in Park Güell at different scales, to complete the floor plans, interior façades and representative sections.
Portal de la Pau de Barcelona
Autoritat Portuària de Barcelona | Barcelona | April 2011
Survey with laser-scanner for the generation of CAD plans and metric verification of the executed project.
Sant Pau Hospital
José Luís González | Barcelona | May 2010
Laser and photometric survey. This consists of the elaboration of a high-resolution three-dimensional model generated by means of a 3D laser scanner (Riegl z420i and Faro 180) of the San Manuel Pavilion of the Historical Precinct of the Hospital de la Santa Cruz y Santo Pablo and the generation of surveys as orthoimages in intensities in jpg format at a scale of 1:100 scaled in a CAD file.
Santa María de Tredós
Consell Generau d’Aran | Val d’Aran | March 2009
High-precision survey by calculating the position of projectors for the virtual reproduction of three Romanesque images.
Drassanes
Museu Marítim de Barcelona | Barcelona | March 2008
Generation of a planimetry of the Royal Dockyards building from the existing orthoimages and point cloud model. The aim is to produce vector plans for the Maritime Museum of Astilleros based on the orthoimages of the laser scanner and the point cloud model of the same.
Teatro Ateneu d’Esparreguera
Ajuntament d’Esparreguera | Esparreguera | June 2007
Laser survey of the Esparreguera Theatre.
Santa Maria La Románica
Ajuntament de Barberà del Vallès | Barberà del Vallès | November 2006
The main objective of the work is to generate a photometric survey and a visualisation model of the group of buildings of La Románica based on the information obtained in situ by means of the laser scanner.
Camp Nou
GEDAS | Barcelona | October 2006
The aim of the work is to generate a high-precision virtual model with the laser scanner for the visualisation of Barça's Camp Nou building. Specifically, it consists of modelling the interior of the building and the exterior façades by composing point clouds containing all the architectural elements of the building, its structure and the materials of which it is composed, enough to be represented at a scale of 1:100.
Casa Batlló
Fundació ONCE | Barcelona | 2006
To create a physical model from a virtual 3D model, so that people with visual disability can perceive the building with their hands. After scanning the house, a high-definition 3D model is generated, which provides a detailed basis for the construction of a physical model of the house.
Santa María del Mar
Empresa Valeri Consultors | Barcelona | June 2006
The aim of the work is to generate a virtual 3D model that allows us to visualise the Santa Maria del Mar building, basically based on the information obtained by means of the laser scanner. The specific objective is to model the interior of the building and the exterior façades by composing point clouds containing all the architectural elements of the building, its structure and the materials of which it is composed, sufficient to be represented at a scale of 1:50.
César Martinell Winery
César Martinell | Sant Cugat | February 2003
Creation of a virtual model from the laser scanner for the subsequent construction of the new architectural project of the building. From the model obtained from the point clouds, a virtual model of the future project can be made, considering the construction variables existing at the site according to its real state at the time of its survey, taking into account deformations, variations with respect to the plans, etc.
Saló de Cent
Laboratori de Modelització Virtual de la Ciutat (LMVC) UPC | Barcelona | Enero 2003
To carry out a laser scanner survey of the town hall and generate a 3D virtual model. The interior of the hall is scanned with several point clouds and then a debugging of these clouds is carried out to obtain 3D virtual models.
Share: